How to save water when washing clothes (for when the taps run dry)

Water shortage, rationing, or just tired of fetching? Practical ways to wash clothes with less water, by hand or by machine, without ending up with soapy, stiff clothes.

By the U-Wash GH team · · 2 min read

Two yellow gloves on a washing line with the words "The No-Wash Tour"

When the taps run dry for a few days, laundry is the first thing to suffer. Every bucket you fetch suddenly feels precious. The good news: you can wash clothes well with a lot less water than most of us use.

Why laundry uses so much water

Most of the water in laundry goes into rinsing, not washing. And the more detergent you use, the more rinses you need to get it out. So the biggest saving starts with soap.

Ten ways to wash with less water

  1. Use less detergent. Less soap means fewer rinses. If the rinse water stays foamy, you used too much.
  2. Soak instead of scrubbing. A good 30-minute soak loosens dirt without extra water.
  3. Wash light to dark in the same water. Whites first, then lights, then darks. Reuse the soapy water as you go (top it up if it's very dirty).
  4. Reuse rinse water. The water from your final rinse is nearly clean. Use it as the first rinse of the next load.
  5. Wash full loads. Half loads use nearly the same water, in a basin or a machine.
  6. Spot clean small marks instead of washing the whole garment.
  7. Wear things more than once when they're not actually dirty. Jeans, jumpers and outer layers don't need washing after one wear.
  8. Choose a water-efficient machine. Twin tubs and front loaders usually use less water than top loaders. See our washing machine guide.
  9. Use the economy setting on automatic machines, and avoid extra rinse cycles unless you have sensitive skin.
  10. Store water before the outage. Keep covered containers filled when water is flowing, so laundry day isn't cancelled.

Tip: Your final rinse water is great for mopping floors, flushing toilets or cleaning the compound. Don't pour it straight down the drain.

Wash in the right order

A simple water-saving sequence for hand washing:

  • Basin 1: soak and wash whites, then lights, then darks.
  • Basin 2: first rinse.
  • Basin 3: final rinse (clean water). When you're done, this water becomes Basin 2 for the next session.

When there's really no water

Sometimes the smartest move is to let someone else's water supply do the work. Many washers have storage tanks, boreholes or reliable supply. During a long shortage, sending out the heavy items (bedding, towels, jeans) saves you a lot of fetching.

Frequently asked questions

How much water does it take to hand wash clothes?

It depends on the load, but most of the water goes into rinsing. Using less detergent and reusing your final rinse water can cut the total a lot.

Can I reuse laundry water?

Yes. Final rinse water can be reused for the next load's first rinse, or for cleaning and flushing. Don't use soapy water on food crops.

Do washing machines waste water?

Older top loaders can use a lot. Twin tubs and front loaders are usually much more water-efficient, especially with full loads.

Know someone who needs this? Share it.

WhatsAppLinkedInX

Keep reading